Filter
Top Products
14
The fitness program is designed to measure the relative
fitness level you have achieved. For the best results,
the fitness program should be used at a time when your
energy level is high; the fitness program should not be
used if you have already exercised during the day.
The fitness program consists of seven 4-minute periods,
and is followed by a 2-minute cool-down period. The
speed and/or incline of the treadmill will automatically
increase at the beginning of each 4-minute period.
To use the fitness program, follow the steps below.
Insert the key into the console.
See HOW TO TURN ON THE POWER on page 9.
Select the fitness program.
To select the fitness
program, press the
FITNESS PROGRAM
button. The letters
ÒFPÓ will appear in the
CALS./FAT CALS./
PULSE display and
the letters ÒAGEÓ will
flash in the DISTANCE
display. Note: If the
walking belt is moving when the FITNESS
PROGRAM button is pressed, the walking belt will
slow to a stop. In addition, if the incline of the
treadmill is higher than 1%, it will automatically
decrease to 1%.
Enter your age into the console.
You must enter your
age to use the
fitness program.
Press either of the
SET AGE buttons.
The current age
setting will appear in the
DISTANCE display. To enter your age, press the
SET AGE buttons again. Each time one of the
buttons is pressed, the age setting will change by
1 year. If one of the buttons is held down, the age
setting will change in increments of 5 years. Once
your age is entered, it will be saved in the consoleÕs
memory. Note: If you have already entered your
age, you must press one of the SET AGE buttons
to verify the age setting before the fitness
program can be started.
Put on the heart rate monitor.
The heart rate monitor must be worn when the
fitness program is used. To put on the heart rate
monitor, see HOW TO USE THE HEART RATE
MONITOR on page 6. Note: The fitness program
can be started without your heart rate being
detected; however, the program will automatically
stop if your heart rate is not detected 4 minutes
after the program is started.
Press the START button.
When the START button is pressed, the TIME
display will begin
counting up and the
DISTANCE display will
show an ÒL 1Ó (level 1),
indicating that the first
4-minute period of the
fitness program has
begun. The incline of the treadmill will automati-
cally adjust to 2.0% and the walking belt will begin
to move at 1.5 mph. Hold the handrails and step
onto the walking belt.
When the first 4-minute period of the fitness
program is completed, the DISTANCE display will
show an ÒL 2,Ó indicating that the second 4-minute
period has begun. The incline and speed of the
treadmill will then increase. When the second
4-minute period is completed, the DISTANCE
display will show an ÒL 3.Ó The incline will remain
the same, but the speed will then increase. At the
beginning of each 4-minute period, the speed
and/or incline of the treadmill will automatically
increase. The fitness program will continue in this
manner until your heart rate reaches 70% of your
theoretical maximum heart rate, and the current
4-minute period is completed. The fitness program
will then be completed, regardless of how many
periods remain.
When the fitness program is completed, the letter
ÒCÓ will appear in the
DISTANCE display,
indicating that the
cool-down period has
begun. The TIME
display will count down
from 2 minutes.
4
5
1
2
3
HOW TO USE THE FITNESS PROGRAM