Filter
Top Products
SET-UP
Setting up the treadmill requires two people. Set the treadmill in a cleared area and remove the packing
materials. Do not dispose of the packing materials until set-up is completed. Scissors (not
included) are needed.
1. With the help of a second person, carefully raise the
treadmill to the position shown at the right.
4. To protect the floor or carpet, place a mat under the treadmill. To order a mat, refer to the back cover of this
manual.
1
3. Remove the backing from the Adhesive Clip (68). Press
the Adhesive Clip onto the Front Endcap (29) in the
indicated location. Press the Allen Wrench (69) into the
Adhesive Clip.
69
68
29
3
2. Cut the shipping tie.
Refer to HOW TO LOWER THE TREADMILL FOR USE
on page 11. Follow the instructions on page 11 to lower
the treadmill. Make sure there is at least one foot of
clearance behind the treadmill.
2
Shipping Tie
6