Filter
Top Products
ASSEMBLY
Complete the assembly steps withthe help of a second person. Set the treadmill in a cleared area and remove all
packing materials. Do not dispose of the packing materials until assembly is completed. THE FOLLOWING
TOOLS ARE REQUIRED FOR ASSEMBLY: The 7/32" allen wrench _ included and your own
adjustable wrench
o
With the help of a second person, raTsethe Right Upright (18)
and Left Upright (not shown) to a vertical position. Align the
hole in the lower end of the Right Upright with the hole in the
side of the Frame (45). Insert an Upright Bolt (22), with a Flat
Washer (15), into the Right Upright and tighten the Bolt into the
Frame. Tighten the Bolt that is already in the Right Upright.
Attach a Bolt and Washer on the left side in the same manner
(not shown).
_,5 15 22
,
With the help of a second person, rotate the Left and Right
Handrails (7, 14) up as shown. Insert two Handrail Bolts (1) into
the Left and Right Uprights (3, 18) and tighten the Bolts with the
7/32" Allen Wrench (71).
14
71
3. Remove the paper backing from the Wrench Clip (62). Press
the Wrench Clip onto the Frame (45) in the indicated location.
Press the 3/16" Allen Wrench (61) into the Wrench Clip.
Make sure that all parts are tightened before using the treadmill.
Note: To protect the floor, a covering should be placed under
the treadmill.
62
61
45