Filter
Top Products
WhileanotherpersonliftstherearoftheFrame(1),
attachtheRearStabilizer(14)to theFramewithtwo
MlOx 73mmButtonScrews(33)andtwoMlOSplit
Washers(34).
/
14
3. While another person holds the Upright (3) near the
Frame (1), connect the Upper Wire Harness (32) to the
Lower Wire Harness (31).
Gently pull the upper end of the Upper Wire Harness
(32) to remove the slack, and slide the Upright (3) onto
the Frame (1). Be careful to avoid pinching the Wire
Harnesses, Attach the Upright with three MlO x 2Omm
Button Screws (35) and three MlO Split Washers (34).
Be careful to avoid
pinching the Wire
Harnesses (31, 32)
34 35
4. Attach the Water Bottle Holder (29) to the Upright (3)
with two M4 x 15mm Screws (15).
29
15