Sears 535LE Treadmill User Manual


 
6
5. Make sure that all parts are tightened before you use the treadmill. To protect the floor or carpet, place a
mat under the treadmill.
4. With the help of a second person, carefully tip the
Uprights (82) down as shown. Make sure the Extension
Legs (103) remain inserted into the Uprights. Attach
one of the Extension Legs with two of the four Short
Screws (101) as shown. Attach the other Extension Leg
in the same way.
Tighten a Handrail Bolt (78) with a Handrail Washer (96)
into the right Extension Leg (103) and the lower end of
the right Handrail (85) as shown. Note: It may be neces-
sary to move the Handrail up or down to align the
Handrail with the hole in the Extension Leg.
Next, tighten a Handrail Bolt (78) with a Handrail Washer
(96) into the left Extension Leg (103) and the lower end
of the left Handrail (85).
With the help of a second person, carefully tip the
Uprights (82) back to the upright position.
4
101
96
78
101
82
96
78
103
103
82
85
85
3. Slide the upper end of a Handrail (85) into the right
Upright (82) as shown. Note: It will be necessary to
pivot the Handrail to the side and back repeatedly
(see arrow A) while pushing on the Handrail (see
arrow B) to slide it fully into the Upright. Next, pivot
the lower end of the Handrail down, push it toward the
right Upright, and then align it with the indicated hole.
Slide the other Handrail (85) onto the left Upright (82) as
described above.
82
85
85
82
Hole
3
B
A