Filter
Top Products
8
5. Attach the Center Base (3) to the Left and
Right Bases (1, 2) with four M10 x 80mm
B
utton Bolts (52), four M10 Curved Washers
(50), and four M10 Nylon Locknuts (65).
5
52
50
50
3
65
50
50
52
52
2
1
6. See the inset drawing. Identify the Center
Frame (7).
Apply some of the included grease to both
sides of the Left Large Spacer (31).
Attach the Left Large Spacer (31) and the Left
Frame (4) to the Center Frame (7) with an
M10 Nylon Locknut (65), an M10 Large
Washer (64), and a 29mm Spacer (48). Then,
press an 89mm Cap (32) into the Center
Frame.
Repeat this step with the Right Large
Spacer (70) and the Right Frame (5).
32
65
64
48
4
7
31
Grease
70
5
6
7