Filter
Top Products
1. With the help of another person, carefully tip the treadmill
onto its
left side. Have a second person hold the treadmill.
Attach a Base Leg (78) to the Base (117) with two Base
Leg Bolts (77) and two Base Leg Nuts (70). Make sure
that the Base Pad (75) is in the position shown. Attach
the other Base Leg as described above.
Attach two Thin Base Pads (103) (only one is shown)
and two Thick Base Pads (75) (only one is shown) to the
Base (117) with four 3/4” Tek Screws (12).
1
75
78
70
117
77
77
12
103
12
75
Star Washer (113)–4
Base Leg Nut (70)–4
Thick Base Pad (75)–2
Thin Base Pad (103)–2
Base Leg Bolt (77)–4
Latch Screw (36)–2
1/2" Screw (51)–10
3/4” Tek Screw
(12)–4
Console Bolt (42)–4
1/2” Tek Screw
(22)–8
ASSEMBLY
Assembly requires two persons. Set the treadmill in a cleared area and remove the packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own 9/16” wrench , rubber mallet , and Phillips screwdriver .
Use the part chart below in identify small parts used in assembly. Extra parts may be included.
6