Razor MX650 Bicycle User Manual


 
3
ASSEMBLY AND SET-UP
1 Place the handlebars in
the handlebar clamps.
Note: Handlebar clamps are
located in the plastic bag.
2 Align parallel to the fork and
tighten the bolts using a 6mm
Allen wrench. When properly
tightened, the handlebars should
not move forward or back.
3 Adjust the brake lever
adjuster to the proper place
and tighten it with the 5mm
Allen wrench.
Attaching the Handlebars
Need Help? Visit our website for replacement parts, product support and a list of authorized service centers
at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
1 Align fender with the hole
in the fork and insert the
bolt. Tighten securely using a
10mm open wrench and 5mm
Allen wrench.
q Attaching the Front Fender
1 Remove screw from front
fork. Align the number plate
with the hole in the fork and
tighten with a Phillips screw-
driver.
q Attaching the Number Plate