Filter
Top Products
Remove contents from box and check parts against parts diagram found on page 6. Remove the foam separators that
protect the components from damage during shipping. Inspect the contents of the box for scratches in the paint or
dents that may have occurred during shipping. Because the Flash Rider 360˚ was partially assembled and packed at the
factory there should not be any problems, even if the box has a few scars or dents.
q Estimated Assembly and Set-Up Time
Allow up to 15–20 minutes for assembly.
BEFORE YOU BEGIN
2
WARNING: DO
NOT USE NON-RAZOR
PRODUCTS WITH YOUR
Flash Rider 360˚.
The Flash Rider 360˚ has been
built to certain Razor design
specifications. The original
equipment supplied at the time of
sale was selected on the basis of
its compatibility with the frame,
fork and all other parts. Certain
aftermarket products may or may
not be compatible and will void
your warranty.
q Required Tools
(2) 5mm
Allen wrenches
(included)
10mm and 13mm
open wrenches
(included)
Pedals
Need Help? Visit our web site for replacement parts and product support at www.razor.com, or call toll-free
at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
Front Fork Assembly
Front Wheel Assembly
Steering Bolt
Seat
Rear Caster Wheels
Spark Bar
Spark Cartridge
Spark Handle
Spark Cartridge Cover