Filter
Top Products
15
To stop the program at any time, press the Stop
button. The time will begin to flash in the display.
T
o restart the program, press the Start button or the
Speed increase button. The walking belt will begin
t
o move at 1 mph. When the next segment of the
program begins, the treadmill will automatically ad-
just to the speed and incline settings for that seg-
ment.
4. Perform the first strength exercise when
prompted.
When the
first strength
exercise
segment be-
gins (only
one indicator
will flash in
the Current Segment column), the walking belt will
slow to a stop and the name of the first strength
exercise will appear in the display for a few sec-
onds.
Next, the dis-
play will
show the
recom-
mended
number of
repetitions
for the first strength exercise.
Remove the clip from the waistband of your
clothes, step off the treadmill, and prepare to begin
the first strength exercise. Every few seconds, the
console will sound a tone; when a tone sounds,
perform one repetition of the exercise. Exercise
with a slow, steady motion; do not perform more
than one repetition each time a tone sounds. The
display will count down the repetitions as you per-
form them.
Note: Refer to the accompanying exercise chart to
see the correct form for each exercise. When per-
f
orming lunges, alternate legs with each repetition.
When performing dumbbell rows, perform half the
r
epetitions with your right arm and half the repeti-
tions with your left arm. The strength exercises re-
quire the use of dumbbells and an inflatable exer-
cise ball (not included).
To purchase additional
dumbbells or an exercise ball, call the tele-
phone number on the front of this manual.
5. Continue the cross training program.
When you have performed the recommended num-
ber of repetitions, the words PRESS START will
appear in the display. To continue the cross train-
ing program, step onto the treadmill,
slide the clip
back onto the waistband of your clothes, and
press the Start button. The treadmill will automati-
cally adjust to the speed and incline settings for the
next segment.
The program will continue in this way until the last
segment ends. The walking belt will then slow to a
stop.
6. Follow your progress with the display.
See step 6 on page 12.
7. Measure your heart rate if desired.
See step 7 on page 12.
8. Turn on the fan if desired.
See step 8 on page 12.
9. When you are finished exercising, remove the
key from the console.
See step 9 on page 12.