Filter
Top Products
18
H
OW TO OPERATE THE PERSONAL TELEVISION
IMPORTANT: Before operating the television, you
must connect a 75 ohm CATV cable to the 75 ohm
terminal on the treadmill, a VCR or DVD player to
t
he three audio/video RCA jacks, or a personal
audio/video player to the audio/video jack below
the television on the console. See page 12 for in-
structions.
Follow the steps below to operate the television.
Insert the key into the console.
See HOW TO TURN ON THE POWER on page
15.
Press the TV button to select a television
source or the Console mode.
When the key is inserted, the television will auto-
matically turn on. Select a television source or the
Console mode by pressing the TV button repeat-
edly.
If you have connected a 75 ohm CATV cable to
the 75 ohm terminal on the treadmill, select the
Tuner source. If you have plugged a DVD player
or VCR into the three audio/video RCA jacks, se-
lect the Input 1 source. If you have plugged a per-
sonal audio/video player into the audio/video jack
below the television on the console, select the
MP3 source. If you do not wish to use the televi-
sion, select the Console mode.
Press the Channel buttons to select the
desired cable channel.
Note: Complete this step only if you are using
analog cable. Otherwise, change channels
through an external source such as your cable
box or your VCR.
When the television is turned on, the screen will
show the last cable channel that was selected. To
select a different channel, press the Channel
(Chan) buttons. The selected cable channel num-
b
er will appear on the screen for a few seconds.
Note: The television is equipped with a channel
m
emorizing function that allows you to go directly
from the current channel to the next channel
saved in memory. Before channels can be se-
lected in this way, they must be saved in the tele-
vision’s memory. See HOW TO USE THE INFOR-
MATION MODE on page 19.
Press the Volume buttons to adjust the volume.
When either Volume (Vol) button is pressed, the
volume level indicator will appear on the screen
for a few seconds.
To use earphones or headphones (not included),
plug them into the headphone jack beside the key
on the console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the console’s
stereo speakers, you must connect your MP3 player or
CD player to the console. Locate the audio/video jack
below the television on the console, and plug it into a
jack on your MP3 player, CD player, or personal video
player. Make sure that the audio/video cable is fully
plugged in.
Next, press the Play button on your MP3 player, CD
player, or personal video player. Then, adjust the vol-
ume on your MP3 player, CD player, or personal
audio/video player. You can also adjust the volume on
the console by pressing the Volume increase and de-
crease buttons.
If you are using a personal CD player or DVD player
and the CD or DVD skips, set the CD player or DVD
player on the floor or another flat surface instead of on
the console.
4
3
2
1