Filter
Top Products
8
5. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (51) so the treadmill is more stable; do
not fully fold the Frame yet.
Attach two Wheels (91) to the Base (90) with a
3/8" x 2 3/4" Bolt (9) and a 3/8" Nut (13). Do not
overtighten the Nut; the Wheels must turn
freely.
5
91
51
9
90
13
4. Attach the Right Upright (83) to the Base (90)
with a 3/8" x 3 1/2" Patch Bolt (8), a 3/8" x 1 1/2"
Patch Bolt (6), and two 3/8" Star Washers (12)
in the indicated locations. Be careful not to
pinch the Wire Harness (84). Partially tighten
the Patch Bolts until the heads of the Patch
Bolts touch the Base; do not fully tighten the
Patch Bolts yet.
83
84
8
12
4
90
3
. Identify the Right Upright (83), which is marked
with a “Right” sticker. Have a second person
hold the Right Upright near the Base (90).
S
ee the inset drawing. Tie the wire tie in the
Right Upright (83) securely around the end of
the Wire Harness (84). Then, pull the other end
of the wire tie until the Wire Harness is routed
c
ompletely through the Right Upright.
90
W
ire Tie
84
8
3
84
3
Wire
Tie
83
84
6