Filter
Top Products
19
THE INFORMATION MODE
The console features an information mode that keeps
t
rack of treadmill usage information. The information
mode also allows you to select miles or kilometers as
t
he unit of measurement and to turn on and turn off the
demo mode.
To select the information mode, hold down the Stop
button, insert the key into the console, and then release
the Stop button. When the information mode is se-
lected, the following information will appear in the dis-
play:
The upper left
corner of the
lower display will
show the number
of hours that the
treadmill has
been operated. The lower right corner of the display will
show the total number of miles or kilometers that the
walking belt has moved. In addition, an “E” for English
miles or an “M” for metric kilometers will appear in the
upper right corner of the display. To change the unit of
measurement, press the Speed increase button. The
lower left corner of the display will show the volume
level. To change the volume level, press the Incline in-
crease button.
The console fea-
tures a display
demo mode, de-
signed to be
used if the tread-
mill is displayed
in a store. While the demo mode is turned on, the con-
sole will function normally when you plug in the power
cord, switch the reset/off circuit breaker to the reset
position, and insert the key into the console. However,
when you remove the key, the displays will remain lit,
although the buttons will not function. If the demo
mode is turned on, a “d” will appear in the upper display
w
hile the information mode is selected. To turn on or
turn off the demo mode, press the Speed decrease but-
t
on.
You can select an audio setting if desired. When you
use an iFit card, a personal trainer will guide you
through your workouts. If a “P” appears in the upper
display, the personal trainer will give you detailed in-
structions. If no “P” appears, your personal trainer will
simply guide you through your iFit workouts. To
change the audio setting, press the Incline decrease
button.
To exit the information mode, remove the key from the
console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs
stereo speakers, you must connect your MP3 player,
CD player, or other personal audio player to the con-
sole through the audio jack.
To use the audio jack, locate the audio wire and plug it
into the audio jack near the iFit slot. Then, plug the
audio wire into a jack on your MP3 player, CD player,
or other personal audio player. Make sure that the
audio wire is fully inserted.
Next, press the Play button on your MP3 player, CD
player, or other personal audio player. Adjust the vol-
ume on your personal audio player.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face instead of on the console.