Filter
Top Products
10
13. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear
plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread-
mill. Keep the included hex keys in a secure place; the large hex key is used to adjust the walking belt (see
pages 20 and 21).
11. Raise the Frame (53) to the position shown.
H
ave a second person hold the Frame until
this step is completed.
Orient the Latch Assembly (55) so that the large
b
arrel and the Latch Knob (54) are in the posi-
tions shown. Attach the lower end of the Latch
Assembly to the bracket on the Base (80) with a
3/8" x 2" Bolt (4) and a 3/8" Nut (8).
Attach the upper end of the Latch Assembly
(55) to the bracket on the Frame (53) with a 3/8"
x 2" Bolt (4) and a 3/8" Nut (8). Note: It may be
necessary to move the Frame back and forth to
align the Latch Assembly with the bracket.
Lower the Frame (53) (see HOW TO LOWER
THE TREADMILL FOR USE on page 18).
12. Plug the indicated end of the power cord into
the socket on the front of the treadmill.
55
8
8
Large
Barrel
80
4
53
1
1
12
Socket
Power
Cord
4
54