Filter
Top Products
10
8. Identify the Left Handrail (78). Slide a Handrail
Cover (77) onto the lower end of the Left
Handrail. Remove the tie from the bracket on
the Left Handrail. If necessary, press the Cage
Nut (not shown) back into place.
Insert the bracket on the Left Handrail (78) into
the top of the Left Upright (82) and at the same
time slide the lower end of the Left Handrail onto
the bracket on the Left Upright.
Start two 5/16" x 3/4" Patch Bolts (5) and two
5/16" Star Washers (9) into the Left Upright (82)
and the Left Handrail (78). Then, start a 5/16" x
1 1/2" Patch Bolt (4). Do not tighten the Patch
Bolts yet.
Start a 1/4" x 1/2" Patch Bolt (8) into the lower
end of the Left Handrail (78). Tighten all four
Patch Bolts used in this step. Slide the
Handrail Cover (77) against the Left Upright
(82).
78
4
Tie
Bracket
Bracket
5
9
8
77
82
8
7. Attach the Base Cover (84) to the Base (94)
with four #8 x 1/2" Screws (1). Be careful not
to overtighten the Screws.
W
ith the help of a second person, tip the tread-
mill so that the Base (94) is flat on the floor.
84
94
1
1
1
1
7