Filter
Top Products
22
ATTACHING THE AB STRAP TO THE AB PULLEY
STATION
Attach the Ab Strap (81) to the Ab Cable (47) at the ab
pulley station with a Cable Clip (69).
ADJUSTING THE BACKREST
To adjust a Backrest (12), loosen the Adjustment Knob
(5) on the Press Upright (2) or the Butterfly Upright
(not shown) by turning it counterclockwise and pulling
it out as far as possible. Slide the Backrest forward or
backward to the desired position, and snap the
Adjustment Knob into a hole in the Backrest Frame
(not shown). Secure the Backrest by turning the
Adjustment Knob clockwise until tight.
ADJUSTING THE CURL PAD
Remove the Large Adjustment Knob (46) from the
Butterfly Front Leg (3).
Align the holes in the Butterfly Front Leg (3) with the
desired set of holes in the Curl Post (39). Re-insert the
Large Adjustment Knob (46) through the holes in the
Butterfly Front Leg and the holes in the Curl Post. Turn
the Large Adjustment Knob clockwise until tight.
Note: When not using the Curl Pad (91), store it
away from the weight system.
12
2
5
47
81
69
39
91
46
3