Filter
Top Products
5
4. Attach the Clip Panel (4) to the Tray (3) with two
M8 x 16mm Button Screws (15).
5. Make sure that all parts are properly tightened
before you use the adjustable handweights.
The use of all remaining parts will be explained in
ADJUSTMENTS, beginning on the following
page.
4
3
15
3. Attach the Tray (3) to the Frame (2) with two M10
x 35m Button Screws (14). Make sure the indi-
cated screw holes on the bottom of the T
ray
are on the same side as the warning decal.
3
2
3
14
4
Warning
Decal
Screw
Holes