Filter
Top Products
4
Before beginning assembly, carefully read the
following information and instructions:
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• As you assemble the adjustable handweights,
make sure all parts are oriented as shown in the
drawings.
The Allen wrench and the following tools (not
included) are required for assembly:
• One rubber mallet
Make Things Easier for Yourself
Everything in this manual is designed to ensure
that the adjustable handweights can be assem-
bled successfully by anyone. Most people find
that by setting aside plenty of time, assembly will
go smoothly.
ASSEMBLY
2. Press four 16mm Inner Caps (16) into the Frame
(2). Slide four Bumpers (7) onto the Frame.
Attach the Frame (2) to the Base (1) with two
M10 x 35mm Button Screws (14). Make sure the
storage tubes are closer to the bottom.
2
1
1
7
7
7
7
16
16
16
14
16
13
12
12
2
1.
Screw two Plate Stops (12) onto each Handle
(13). Make sure that the Plate Stops are fully
tightened.
Before beginning assembly
, make sure that
you understand the information in the box
above.
Storage
Tube