Filter
Top Products
1.
While another person lifts the Base (1), attach
the Front Stabilizer (6) to the Base with two
M10 x 82mm Button Screws (82).
Next, hold the Left and Right Stabilizer Covers
(118, 119) around the Base (1). Attach the
Stabilizer Covers with six M4 x 16mm Round
Head Screws (101) (only three are shown).
6
2. Remove the indicated screw and bracket
from the Base (1). Discard the screw and the
bracket.
Next, turn the Base Foot (26) into the Base (1)
as far as possible.
1
Bracket
26
Screw
3
2
1
To make assembly easier, read the
i
nformation on page 5 before you begin
assembling the elliptical exerciser.
3. Attach the Rear Stabilizer (7) to the Frame (2)
with two M10 x 127mm Button Screws (83).
Next, hold the handle on the Frame (2), press
the Latch Button (68), and lower the Frame until
the Rear Stabilizer (7) is resting on the floor.
6
101
119
8
2
1
118
83
7
Handle
2
68