ProForm PFEL64907.0 Bicycle User Manual


 
16
5. Measure your heart rate if desired.
I
f there are sheets of
clear plastic on the
m
etal contacts on
the handgrip pulse
sensor, remove the
plastic. To measure
your heart rate, hold
the handgrip pulse
sensor with your
palms resting against
the metal contacts.
Avoid moving your hands
or gripping the contacts tightly.
When your pulse is
detected, a heart-
shaped symbol will
flash in the left dis-
play. Each time your
heart beats, one or
two dashes will appear, and then your heart rate
will be shown. For the most accurate heart rate
reading, hold the contacts for at least 15 seconds.
Note: If you continue to hold the handgrip pulse
sensor, the display will show your heart rate for
up to 30 seconds.
If your heart rate is not shown, make sure that
your hands are positioned as described. Be care-
ful not to move your hands excessively or to
squeeze the metal contacts tightly. For optimal
performance, clean the metal contacts using a
s
oft cloth;
n
ever use alcohol, abrasives, or
chemicals to clean the contacts.
6. Turn on the fan if desired.
The fan has high and low speed settings. Press
the Fan button repeatedly to select a fan speed or
to turn off the fan.
Pivot the thumb tab
on the right side of
the fan to adjust the
fan angle.
Note: If the pedals do not move for about thirty
seconds, the fan will turn off automatically.
7. When you are finished exercising, the console
will turn off automatically.
If the pedals do not move for several seconds, a
tone will sound and the console will pause.
If the pedals do not move for about five minutes
and the buttons are not pressed, the console will
turn off and the displays will be reset.
Corsair
ELPF64907
PFEL64907.0
Thumb
Tab
Metal Contacts