Filter
Top Products
7
BATTERY INSTALLATION
Before the electronic monitor can be operated, two
ÒAAÓ batteries must be installed. If you have not
installed batteries, see assembly step 3 on page 4.
OPERATING THE ELECTRONIC MONITOR
1. To turn on the power, press the on/reset button or
simply begin exercising on the AIR WALKER. The
entire display will appear for two seconds. The
electronic monitor will then be ready for operation.
2. Select one of the five modes:
Scan modeÑWhen the power is turned on, the
scan mode will be selected automatically. The
scan mode
can also be
selected by
repeatedly
pressing the
mode but-
ton. One
mode indi-
cator will
show that
the scan
mode has been selected, and a second mode indi-
cator will show which mode is currently displayed.
Speed, time, distance, or calories modeÑ
These modes can be individually selected by
repeatedly
pressing
the mode
button. The
mode indi-
cators will
show which
mode has
been
selected.
(Make sure
that the scan mode is not selected.) The modes
will be selected in the following order: speed, time,
distance, calories, scan.
3. The monitor has an auto-off feature to turn off
the power. If the pedals are not moved and the
monitor buttons are not pressed for four minutes,
the power will turn off automatically in order to
conserve the batteries.
To reset the LCD display, press the on/reset button.