Filter
Top Products
1. With the help of a second person, carefully raise the
Uprights (82) until the treadmill is in the position shown.
82
1
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own phillips screwdriver and rubber mallet .
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
2. Remove the Latch Knob (110) from the Latch Pin (114).
Make sure that the Latch Pin Collar (112) and the Spring
(111) are on the Latch Pin (114) as shown. Insert the
Latch Pin into the Storage Latch (77).
Tighten the Latch Knob (110) back onto the Latch Pin
(114).
112
111
114
77
110
2
3. See drawing 3a. Press a Handrail Insert (102) into the
lower end of a Handrail (85). Hold an Extension Leg
(103) against the lower end of the Handrail. Insert a
Handrail Bolt (78) with a Handrail Washer (36) into the
Extension Leg and thread the Handrail Bolt three or
four turns into the Handrail. Notice the angle of the
Handrail and insert the Handrail Bolt and Washer at the
same angle (see drawing 3b).
Attach a Handrail Insert (102) and an Extension Leg
(103) to the other Handrail (85) in the same way.
103
85
102
36
78
85
3a
78
36
103
3b
6