Filter
Top Products
22
H
OW TO ADJUST THE CUSHIONING SYSTEM
Remove the key from the console and unplug the
p
ower cord.
T
he treadmill features a cushioning sys-
tem that reduces the impact as you walk or run on the
treadmill. To increase the firmness of the walking plat-
form, step off the treadmill and slide the cushion ad-
justers toward the front of the treadmill. To decrease
the firmness, slide the cushion adjusters toward the
back of the treadmill. Note: Make sure that both ad-
justers are set at the same firmness level. The
faster you run on the treadmill, or the more you
weigh, the firmer the walking platform should be.
THE OPTIONAL CHEST PULSE SENSOR
A
n optional chest pulse sensor offers hands-free oper-
ation as it tracks your heart rate during your workouts.
T
o purchase the optional chest pulse sensor, call
the telephone number on the front cover of this
manual.
If you purchase the optional chest pulse sensor,
follow the steps below to install the receiver in-
cluded with the chest pulse sensor.
1. Make sure that the power cord is unplugged.
Remove the indicated #8 x 3/4" Screw (12) and the
Access Door (87) from the Console Base (93).
2. Connect the wire on the receiver (A) to the indi-
cated wire extending from the Console Base (93).
Hold the receiver so that the small cylinder is
oriented as shown and is facing the Console
Base. Attach the receiver to the plastic posts on the
Access Door (87) with the two included small
screws.
3. Make sure that no wires are pinched. Reattach
the Access Door (87) with the #8 x 3/4" Screw (12).
Discard the other wires included with the receiver.
A
87
Small
Cylinder
12
93
Wires
Small
Screws
Cushion
Adjustor
Walking Platform
Increase
Decrease
Cushion
Adjustor