Filter
Top Products
13
17. IMPORTANT: Before you begin this step,
make sure that you have read and followed
all the instructions in step 16.
Raise the Frame (56) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (53) so that the large
barrel and the latch knob are oriented as shown.
Attach the upper end of the Storage Latch (53)
to the bracket on the Frame (56) with a 3/8" x
1 3/4" Bolt (6) and a 3/8" Nut (12).
Attach the lower end of the Storage Latch (53) to
the Base (94) with a 3/8" x 2" Bolt (3) and a 3/8"
Nut (12). Note: It may be necessary to move the
Frame (56) back and forth to align the Storage
Latch with the Base.
17
53
12
Large
Barrel
56
6
Latch
Knob
12
3
94
16. IMPORTANT: See page 15 and plug in the
power cord. Next, see page 17 and turn on
the power.
T
hen, press the Incline increase button
once.
When the frame stops moving, remove the
k
ey from the console and unplug the power
cord.
16
IMPORTANT:
Make sure to follow all
instructions in this step.