Filter
Top Products
7. 7
Set the Left Handrail (82) into the top of the Left
Upright (84). Insert the Upright Wire (87) several
inches down into the top of the Right Upright
(85). Make sure that the wire tie does not fall
into the Right Upright. Set the Right Handrail
(83) into the top of the Right Upright. Be careful
not to pinch the Upright Wire.
Orient the Console Frame (102) as shown with
the welded nuts on the bottom. Insert the ends
of the Console Frame into the top of the Left
Handrail (82) and Right Handrail (83). Attach the
Console Frame with four 1/4" x 1 1/4" Patch
Bolts (9) and four 1/4" Star Washers (12). Start
all four Patch Bolts before tightening any of
them.
Lift the Console Frame (102) and Handrails (82,
83) off of the Uprights (84, 85). Pull the Upright
Wire (87) out of the Right Upright (85).
82
102
Welded
Nuts
.
Set the console assembly (A) face down on a
soft surface to avoid scratching the console.
Attach the Left Accessory Tray (103) with four
#8 x 1/2" Screws (3). Start all four Screws be-
fore tightening any of them.
Attach the Right Accessory Tray (104) as de-
scribed above.
8
3
103
A
3
104
10