Filter
Top Products
10
14. Slide a Short Pad Tube (34) into a hole in the Leg
Lever (8). Wet both sides of the Pad Tube with
soapy water
. Slide two Large Pads (35) onto the
Pad Tube as shown. Press two Large Pad Caps
(36) into the Pad
Tube. Repeat with the other
Short Pad Tube and the Leg Lever.
Slide the Long Pad Tube (66) into the hole in the
Leg Station Attachment (14). Wet both sides of
the Pad Tube with soapy water. Slide two Small
Pads (37) onto the Tube as shown. Press two
Small Pad Caps (38) into the Pad Tube.
16. Make sure that that all parts are properly tightened before you use the weight bench. The use of all
remaining parts will be explained in ADJUSTMENTS, beginning on the following page.
15. Attach the Curl Pad (13) to the Curl Post (9) with
two M6 x 16mm Screws (48).
14
15
38
8
38
36
36
35
35
66
34
14
37
37
34
13
9
48