Filter
Top Products
9
Note: There are two twenty-minute programs and
two thirty-minute programs. The graphs on the left
side of the console show how the speed of the
walking belt will change during the programs.
During the AEROBIC 1 program, for example, the
speed will gradually increase during the first ten
minutes, and then gradually decrease during the
last ten minutes. Each program begins with a
warm-up period and ends with a cool-down period.
If a workout program is selected, set a maximum
speed setting.
If the manual mode is selected, go to step 4.
If a workout program is selected, a number will be
flashing in the SPEED display. This number is the
maximum speed that
the walking belt will
reach during the se-
lected program. If de-
sired, press the SPEED
▲▲
button repeatedly to
change the maximum
speed setting. If the maximum speed setting is in-
creased, the difficulty level of the entire program will
increase. If the maximum speed setting is de-
creased, the difficulty level of the entire program will
decrease.
Press the START/STOP button.
A moment after the
START/STOP button is
pressed, the walking
belt will begin to move.
Hold the handrails and
carefully begin walking.
If the manual mode is selected: As you exercise,
change the speed of the walking belt as desired by
pressing the SPEED buttons.
To stop the walking belt, press the START/STOP
button. The TIME/PACE display will begin to flash.
To restart the walking belt, press the START/STOP
button again. To stop the walking belt and reset the
displays, press the START/STOP button, remove
the key from the console, and then reinsert the key.
If a workout program is selected: The speed of
the walking belt will change automatically during the
program as shown by the graphs on the left side of
the console. The time remaining in the program will
be shown in the TIME display. During the last few
seconds of each one-minute period of the program,
four tones will sound to alert you that the speed may
change. When the program is completed, the walk-
ing belt will slow to a stop.
Note: If the program is too difficult or too easy, the
difficulty level of the program can be adjusted. Press
the SPEED
▲▲
or
▼▼
button. A number will begin to
flash in the SPEED display. This number is the maxi-
mum speed that the walking belt will reach during
the program. Press the SPEED
▲▲
or
▼▼
button repeat-
edly to change the maximum speed setting. When
the maximum speed setting is increased, the diffi-
culty level of the entire program will increase. When
the maximum speed setting is decreased, the diffi-
culty level of the entire program will decrease.
To stop the program for a moment, press the
START/STOP button. The TIME/PACE display will
begin to flash. To restart the program, press the
START/STOP button again. To stop the program
and reset the displays, press the START/STOP
button, remove the key from the console, and then
reinsert the key.
Change the incline of the treadmill, if desired.
To change the incline,
press the incline but-
tons. Each time one of
the buttons is pressed,
the incline will change
by 0.5%. Every three
times a button is
pressed, one addi-
tional indicator will
light or darken in the
incline display. The
buttons can be held
down to change the in-
cline more quickly.
Note: After the buttons
are pressed, it may
take a moment for the treadmill to reach the se-
lected incline setting.
Follow your progress with the LED track and the
four displays.
The LED
Track—The
LED track repre-
sents a distance
of 1/4 mile. As
you exercise, the
indicators
around the track
will light one at a time until you have completed 1/4
mile. The indicators will then darken and another lap
will begin.
6
5
4
3