Filter
Top Products
6
ASSEMBLY
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed.
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
s
mall amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included allen wrenches and your own phillips screwdriver ,
rubber mallet , and adjustable wrench .
For help identifying the assembly hardware, see the drawings below. If a part is not in the parts bag, first
check to see if it has been preassembled.
If a part is missing, call toll-free 1-888-936-4266.
1. Make sure that the power cord is unplugged.
With the help of another person, carefully raise the
Uprights (69) to the vertical position. Identify the Right
Extension Leg (109), which has a Ball Joint (63) in the
position shown.
Insert the Right Extension Leg (109) into the base of the
Uprights (69) as shown. Note: It may be helpful to tip the
Uprights as you insert the Right Extension Leg.
Insert
the Left Extension Leg (not shown) in the same
way.
Handrail
Washer (100)–2
1/2” Screw (119)–1
3/4” Screw (2)–4
Wheel Nut (32)–2
6
3/4” Tek Screw (58)–8
1
Silver Ground
Screw (75)–1
1” Tek Screw (39)–6
1/2” Screw (48)–3
Plastic Spacer
(9)–2
2” Screw (40)–2
Handrail Bolt (37)–2
5
Wheel Bolt (64)–2
69
63
109
69
1