ProForm 1290 zlt Treadmill User Manual


 
13
OPERATION AND ADJUSTMENT
DANGER: Improper connection of the equip-
ment-earthing conductor can result in an increased risk of
electric shock. Check with a qualified electrician or service-
man if you are in doubt as to whether the product is prop-
erly earthed. Do not modify the plug provided with the
product—if it will not fit the outlet, have a proper outlet in-
stalled by a qualified electrician.
THE PRE-LUBRICATED WALKING BELT
Y
our treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili-
cone spray or other substances to the walking belt or the walking platform. Such substances will deterio-
rate the walking belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
This product must be earthed. If it should malfunction or break
down, earthing provides a path of least resistance for electric cur-
rent to reduce the risk of electric shock. This product is equipped
with a power cord having an equipment-earthing conductor and an
earthing plug. IMPORTANT: If the power cord is damaged, it
must be replaced with a manufacturer-recommended power
cord.
See drawing 1. Plug the indicated end of the power cord into the
socket on the treadmill.
HOW TO PLUG IN THE POWER CORD IN AUSTRALIA
See drawing 2. Plug the power cord into an appropriate outlet that
is properly installed and earthed in accordance with all local codes
and ordinances. IMPORTANT: The treadmill is not compatible
with RCD-equipped outlets.
HOW TO PLUG IN THE POWER CORD IN THE UK
See drawing 3. Press the pins on the power cord into the metal clips
in the adapter as shown. Close the adapter cover over the end of the
power cord and tighten the screw in the adapter. IMPORTANT:
Make sure that the adapter cover is secure and the screw has
been tightened before using the power cord.
See drawing 4. Plug the power cord into an appropriate outlet that is
properly installed and earthed in accordance with all local codes and
ordinances. IMPORTANT: The treadmill is not compatible with
RCD-equipped outlets.
Socket on Treadmill
Metal
Clips
1
3
Pins
Screw
Adapter
Outlet
4
Adapter
Cover
Outlet
2
Power Cord