Filter
Top Products
Assembling the EFX 21
Installing the Handlebars
CAUTION: Handlebars can swing and cause injury. Have your
assistant hold the handlebar and gently lower it into a vertical
position when the handlebar assembly is complete.
To install the moving handlebars:
1. For proper alignment, rotate the pivot arm to a horizontal
position. Apply pressure to fit the protrusion on the
handlebar into the handlebar bracket.
Figure 8: Handlebar and bracket attachment
2. Insert three socket head cap screws, three split washers,
and three washers through each handlebar bracket. To
secure the handlebars, wrench tighten the fasteners using
a ¼-inch hex key.
Figure 9: Upper body handlebar attachment detail