Filter
Top Products
EFX 5.21/ 5.23 Elliptical Fitness Crosstrainer Assembly Guide 7
Adjusting the Ramp
The EFX ramp incline can be set to one of three positions: Low (15
degrees), Medium (20 degrees), or High (25 degrees).
If you are on the equipment, dismount. To adjust the ramp, you can
straddle the equipment with one foot on either side or stand to one
side of it.
CAUTION: To adjust the ramp, you must be standing on the floor.
You cannot be standing on the equipment or the foot pedals.
Place one hand under the front of the ramp and one hand on the
lever. Pull the front of the ramp up and toward you while pulling the
lever back and up. This releases the ramp for adjustment.
Carefully adjust the ramp to the desired height.
Important: Before releasing your grip, test the ramp by gently
pushing it down with your hands to make sure that it has securely
clicked into one of the incline positions. The ramp should not move
when tested.
CAUTION: Be aware of the position of the handrails and console
when you are adjusting the ramp. Be careful not to bump your head
on the console when you stand up.