Precor 835 Stepper Machine User Manual


 
22 Assembling and Maintaining the 835 Climber
8. Clean the foot steps, plastic covers and upright support
with a soft cloth or wipe moistened with an appropriate
cleaning solution. For more information about which
cleaners to use, refer to Daily Cleaning.
9. Level the climber as described in the section Making Sure
the Unit Is Stable.
Important: Do not allow anyone to use the climber until it has
been leveled and made stable.
Making Sure the Unit Is Stable
Make sure the unit is level before allowing anyone to use it.
CAUTION: To eliminate movement, make sure the adjustable feet
are in contact with the floor.
To level the unit:
1. Gently rock the unit. If there is any movement, ask your
assistant to tip the unit to one side while you locate the
adjustable feet.
2. Correct the height of each adjustable foot as follows.
If you want to …
Then turn the adjustable feet …
Raise the unit Counterclockwise
Lower the unit Clockwise
Important: Place the unit on a flat surface. Rotating the
adjustable feet cannot compensate for extremely uneven surfaces.
When you are finished adjusting the unit, place the unit on the
floor and recheck that it is level.