Filter
Top Products
39
Polar M71 ti calculates the OwnCal energy expenditure
based on the gender, weight, exercise time and heart
rate. Therefore the weight and gender must be reset.
Changing the user also affects the calculation of the
total calorie expenditure (T.KCAL). If the T.KCAL reading
is not zeroed when the user changes, the Polar M71 ti
adds the calorie expenditure of new exercise periods into
its memory, even although the user information is
changed. If you want that only your own energy
expenditure is stored in the Polar M71 ti’s memory you
must set the calorie calculator off in the USER mode
when the equipment is used by someone else.
... THERE IS NO HEART RATE READING?
1. Check that the electrodes of the transmitter are
moistened and that you are wearing it as instructed.
2. Check that you have kept the transmitter clean.
Care and maintenance.
3. Check that there are no sources of electromagnetic
radiation in the close vicinity of the Polar wrist
receiver, such as TV sets, cellular phones, CRT monitors
etc. Precautions.
4. Have you had a cardiac event which may have altered
your EKG waveform? In this case consult your physician.
...HEART SYMBOL FLASHES IRREGULARLY?
1. Check that your Polar wrist receiver is inside the
transmission range and not further that 3 feet/1
meter from the Polar transmitter you are wearing.
2. Check that the elastic strap has not become loose
during exercise.
3. Make sure that the electrodes of the transmitter are
moistened.
4. Make sure that there is no other heart rate
transmitter within the reception range ( 3 feet/1
meter). Precautions/Crosstalk.
5. Cardiac arrythmia may cause irregular readings. In this
case consult your physician.