Filter
Top Products
FIGURE 4
STEP 4:
¯
Slide the four ROLLER PADS (7) onto the MAIN PAD SUPPORT (3) using 3/4 X 16" TUBES (6), and f our
STAKLOCK COLLARS (13) as shown in FIGURE
FIGURE 5
STEP 5:
¯
Pull back the SPRING PIN and CAREFULLY slide the MAIN PAD SUPPORT (3) over the FRONt BASE
SUPPORT (1) as shown in FIGURE
¯
Insert one 1-3/4" SQ. END CAP (15) into the ends of the FRONT BASE SUPPORq[’ (1) as shown in FIGURE
THIS CONCLUDES THE ASSEMBLY OF THE 822104 ADJUSTABLE SIT-UP BENCH
5