Filter
Top Products
6
STEP 2:
• Snap two 2” SQ INSERT GUIDES (13) into the ends of the
BENCH FRAME (1) as shown in FIGURE 2.
FIGURE 2
• Assemble the 3/8” SPRING PIN (11) into the SPRING PIN
BARREL on the BENCH FRAME (1) and tighten nut
securely. See FIGURE 2.
11
21
3
1
• Remove backing from the two RUBBER STRIPS (21) and
attach them to the PLATES of the BAR SUPPORT (3) as
shown in FIGURE 2.
13
FIGURE 3
• SECURELY assemble the ARM PAD (5) to the ARM
PAD SUPPORT (2) using four 3/8 X 1” BOLTS (10) and
four 3/8” WASHERS (15) as shown in FIGURE 3.
STEP 3:
5
3/8 X 1”
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
15
2
10
• Clean the surfaces of the PLATES on the BAR SUPPORT
(3) with rubbing alcohol and allow to dry.
PLATE
PLATE