Filter
Top Products
3/8 X 3"i
SECURELY attach the 100 LEG PRESS lo the FRONT LEG (1) using two 3/8" X 3" BOLTS (9), four 3/8" WASHERS (6),
two 3/8" LOCK NUTS (7). See FIGURE
¯
Route LEG CABLE (2) around the 3-1/2" PULLEY on the LEG PRESS as shown in FIGbqtE 5. (NOTE: Pulley may need to
temporarily removed.)
¯
Attach the end of the LEG CABLE (2) to the QUICK DISCONNECT LINK (5). See FIGURE
¯
SECURELY tighten the QUICK DISCONNECT (5) to the tab on the FRONT LEG (1) as shown in FIGURE