ParaBody 216 Home Gym User Manual


  Open as PDF
of 5
 
• TIGHTEN cable jam nut securely!
5
FIGURE 6
STEP 6:
WEIGHT
STACK PIN
WEIGHT STACK
CABLE
20 HOLE WEIGHT
STACK SHAFT
• Assemble the WEIGHT STACK PIN to the
20 HOLE WEIGHT STACK SHAFT as
shown.
• Screw the WEIGHT STACK CABLE into
the 20 HOLE WEIGHT STACK SHAFT of
the HEAD PLATE until the CABLE slightly
pulls on the HEAD PLATE.
Thank you for purchasing the Parabody 216101 50 LB. ADD-ON KIT. If unsure of proper use of equipment, call your local
LifeFitness distributor or call the Parabody customer service department at (800) 328-9714.
• CAREFULLY assemble and SECURELY
tighten any previosly removed or loos-
ened bolts in the TOP BOOM to allow the
GUIDE RODS to be secured. Refer to the
GYM ASSEMBLY INSTRUCTIONS .
 previous