Filter
Top Products
STEP 1: Verify Package Content
Verify package content by emptying contents of
bag(s) and confirming all parts are included and
undamaged. Do this at home before you leave on
your trip.
STEP 2: Set Up the Tent
A) Select a smooth level site and
spread out your tent.
B) Extend the tent poles and place in
position ready for installation. Push
each of the four tent poles through pole
slee
ves.
C) After sliding poles through sleeves,
gently flex poles into an arch and insert
ends onto pin-rings at tent base.
D) Snap Quick Clips (attached to tent
body) onto tent poles to shape tent.
STEP 3: Attach the Rainfly
A) Drape rainfly over tent (pole sleeve
down).
B) Locate pole sleeve on underside of
rainfly. Slide pole through sleeve.
C) Insert one end of rainfly pole into
grommet. Gently flex pole and insert opposite end
diagonally into other grommet.
D) Attach the s-hooks to the pin-ring at the tent
base.
Step 4: Stake Tent
A) Stake tent by driving stakes through
the pin-rings at the base of tent.
Step 5: Adding Accessories
A) The gear loft is for extra storage of
light weight items (i.e. maps, eyeglass-
es). Attach its s-hooks to the fabric
loops inside tent ceiling.
B) The cup holder is for small drinks.
S-hook easily secures to fabric loops located
on inside ceiling of tent.
ASSEMBLY INSTRUCTIONS
DISASSEMBLY INSTRUCTIONS
THIS RECREATIONAL PRODUCT REQUIRES TWO ADULTS TO ASSEMBLE.
* Unless otherwise specified all instructions will be given assuming the assembler is facing the front opening of the tent.
* Carefully fold out your poles, using caution to prevent snapping the shock-cording. Make sure each pole segment is “seated” into the next section
before flexing the pole during set-up.
*
Do not drop tent pole bag. Do not bounce tent bag on its end to remove tent, as these actions may damage the shock-cording and/or pole ends.
STEP 1: Remove the Stakes
Carefully remove stakes by pulling out the hook ends.
Tip: Do not pull or tug at the stake loops sewn onto the
f
abr
ic body
.
Remo
v
e excess soil from the stakes and
store them in their bag.
STEP 2: Take Down Gear Loft
Detach gear loft by unhooking gear loft s-hooks from
fabric loops on ceiling. Fold gear loft for storage.
STEP 3: Remove Rainfly
A) Detach S-hooks and nylon fasteners that hold down
r
ainfly
.
B) Remove pole from grommet and slide out from pole
slee
v
e
.
C) Fold rainfly and pole for storage.
STEP 4: Take Down the Tent
A) Unfasten Quick Clips from tent poles.
B) Remove poles from pin-rings.
C) Slide poles out by carefully pushing them through the
sleeves, away from the end at which you are standing.
D) Carefully f
old poles and store them in their bag.
STEP 5: Fold the Tent
F
old tent into rectangular shape the width of pole bag.
Lay pole bag at one end of tent and roll tightly together,
slowly squeezing air out as you go. (You can roll rainfly
together with tent in this step.) Store tent in carry bag
pro
vided. (Following these instructions will make it easi-
er to fit tent into bag.)
*Make sure all window(s) and door(s) are unzipped prior to disassembly.
*Store all Poles and Stakes in their corresponding Bags to prevent any possible tearing or damage to the fabric piece(s).
CAMPERS WANT TO KNOW
Should I use a seam sealer?
We highly recommend seam sealing your tent
seams. Use a seam sealer compound (tube or bottle
type) that applies directly to the stitching for best cover-
age. Make sure compound is completely dry before
rolling up your tent. Follow the manufacturer’s direc-
tions.