Filter
Top Products
65
KNOW YOUR UNIT
Front of unit
Back of unit
Components
NOTE:
Clothing may be damaged if you pull the unit off
without opening the clip.
Display
Low battery
indicator
How to
connect the
strap and
the clip
How to release
and fasten with a
clip
How to
attach the
strap to the
main unit
▲/MODE button
/ACTION button
▼/MEMO (memory)
button
Battery cover
Battery cover
screw
Strap attachment
SET button
Strap
Clip
To release
To fasten
Create a
loop to
attach
the strap
The unit comes with the battery installed. When you
use the unit for the rst time or you want to change
settings, follow the steps below. For setting range
details refer to “Specications” on page 24.
1. Press the SET button on the
back of the unit with a thin,
sturdy, stick that will not
break easily.
Do not press the SET button
with a sharp point. This could cause damage.
The following display (HELLO) will appear.
NOTE:
The display will turn off if no buttons are
pressed after 5 minutes while setting the unit
for the rst time or after resetting the unit.
When resetting the unit, the display will show
the current step count.
2. Setting the hour.
• Press
( ) to advance (go back) one.
SETTINGS
Press or to select the
desired value for a setting.
Press to conrm the setting.