Filter
Top Products
16
For smooth
operation of
the elliptical
crosstrainer,
the incline
frame should
be kept clean.
Using a soft
cloth and mild
detergent,
clean dust and
other residue
from the incline frame where the wheels make contact
with it. Other parts of the elliptical crosstrainer can
also be cleaned in this manner. Never use abrasives
or solvents.
Inspect and tighten all parts of the elliptical crosstrainer
regularly. Replace any worn parts immediately.
MAINTENANCE
Incline
Frame
Wheel
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the elliptical
crosstrainer has been used and the total number of
miles that the pedals have moved. The information
mode also allows you to switch the console from miles
to kilometers. In addition, the information mode allows
you to turn on and turn off the demo mode.
To select the information mode, press the RESIS-
TANCE button labeled Ò1Ó and the SELECT WORK-
OUT button at the same time. The following informa-
tion will be shown:
The left LED display will
show the total number
of hours that the ellipti-
cal crosstrainer has
been used. In addition,
an ÒEÓ for English miles
or an ÒMÓ for metric kilo-
meters will appear in the display. Press the START
PROGRAM button to change the unit of measurement,
if desired.
The right LED display
will show the total num-
ber of miles that the
pedals have moved.
IMPORTANT: Make
sure that there is not
a ÒdÓ in the right dis-
play. If a ÒdÓ appears in
the display, the console
is in the ÒdemoÓ mode.
This mode is intended to be used only when an elliptical
crosstrainer is displayed in a store. When the console
is in the demo mode, the power supply can be plugged
in and the displays and indicators on the console will
automatically light in a preset sequence, although the
buttons on the console will not operate. If a ÒdÓ
appears in the right display when the information
mode is selected, press the SELECT WORKOUT
button so the ÒdÓ disappears.
To exit the information mode, press the RESISTANCE
button labeled Ò1Ó and the SELECT WORKOUT button
at the same time.