Filter
Top Products
20
THE INFORMATION MODE
The console features an information mode that keeps
t
rack of the total distance that the walking belt has
moved and the total number of hours that the incline
t
rainer has been used. The information mode also al-
lows you to select miles or kilometers to measure dis-
tance, and to turn on and turn off the display demo
mode. You can also adjust the contrast level of the
display and view the status of the optional iFit Live
module.
To select the information mode, hold down the Stop
button, insert the key into the console, and then re-
lease the Stop button. When the information mode is
selected, the following information will appear in the
display:
The display will show the
total number of miles that
the walking belt has moved
and the total number of
hours the incline trainer has
been used.
The display will show the selected unit of measure-
ment. To change the unit of measurement, press the
Speed increase button. To view distance in miles, se-
lect ENGLISH. To view distance in kilometers, select
METRIC.
The console features a display demo mode, designed
to be used if the incline trainer is displayed in a store.
While the demo mode is turned on, the console will
f
unction normally when you plug in the power cord,
press the power switch into the reset position, and in-
s
ert the key into the console. However, when you re-
move the key, the displays will remain lit, although the
buttons will not function. If the demo mode is turned
on, the word “ON” will appear in display while the infor-
mation mode is selected. To turn on or turn off the
demo mode, press the Speed decrease button.
The display will also show the contrast level of the dis-
play. Press the Incline increase and decrease buttons
to adjust the contrast.
The display will show whether an accessory is plugged
into the console. If the iFit Live module is plugged in,
the display will show the words “WIFI STATUS.” If a
USB device is plugged in, the display will show the
words “USB STATUS.” If nothing is plugged in, the dis-
play will show the words “NO MODULE DETECTED.”
To exit the information mode, remove the key from the
console.