Filter
Top Products
7
1. Make sure that the power cord is unplugged.
With the help of a second person, tip the incline
t
rainer onto its left side. Have the second person
hold the incline trainer to prevent it from tipping.
Attach the four Base Feet (80) and the four
Base Foot Spacers (79) to the Base (78) with
four #8 x 1" Tek Screws (2). Be careful not to
overtighten the Tek Screws.
1
2
2
80
80
8
0
79
79
78
2. Hold the Upright (74) near the incline trainer,
with the brackets on the Upright oriented as
shown.
See the inset drawing. Tie the wire tie in the
Upright (74) around the end of the Upright Wire
(72). Then, pull the other end of the wire tie until
the Upright Wire is routed completely through
the Upright.
Attach the Upright (74) to the Base (78) with
four 3/8" x 3 1/2" Bolts (3) and four 3/8" Star
Washers (9). Start all four Bolts before tight-
ening any of them. Be careful not to pinch
the Upright Wire (72).
2
74
78
9
3
72
9
74
72
Wire
Tie
Bracket
3
79
80
2
79
2
Wire
Tie