NordicTrack NTL10950 Treadmill User Manual


 
14
Turn on the fan if desired.
To turn on the fan at low
speed, press the
AutoBreeze Fans button;
the number 1 will appear
below the word “Fan” in
the display. To turn on
the fan at medium speed, press the button a sec-
ond time; the number 2 will appear in the display.
To turn on the fan at high speed, press the button
a third time; the number 3 will appear in the dis-
play. To select the auto mode, press the button
again; the word “Auto” will appear in the display.
When the auto mode is selected, the speed of the
fan will automatically increase and decrease as
the speed of the walking belt increases and de-
creases.
To turn off the fan, press the AutoBreeze Fan but
-
ton again. Note: A few minutes after the walking
belt is stopped, the fan will automatically turn off.
When you are finished exercising, remove the
key.
Step onto the foot rails, press the Stop button, and
adjust the incline of the treadmill to the lowest
setting.
The incline must be at the lowest setting
when the treadmill is folded to the storage posi-
tion or the treadmill will be damaged. Next, re-
move the key from the console and put it in a se-
cure place. Note: If the display remains lit after
the key is removed, the console is in the
“demo” mode. See page 23 and turn off the
demo mode.
When you are finished using the treadmill, switch
the reset/off circuit breaker to the off position and
unplug the power cord.
87