Filter
Top Products
22
HOW TO USE PROGRAMS DIRECTLY FROM
OUR WEB SITE
Our Web site at www.iFIT.com allows you to play
iFIT.com audio and video programs directly from the
internet. To use programs from our Web site, the ellip-
tical crosstrainer must be connected to your home
computer. See HOW TO CONNECT YOUR COMPUT-
ER on page 20. In addition, you must have an internet
connection and an internet service provider. A list of
specific system requirements will be found on our Web
site.
Follow the steps below to use a program from our
Web site.
Turn on the console.
Refer to step 1 on page 14.
Select the iFIT.com mode.
Each time the
console is
turned on, the
manual mode
will be selected.
To select the
iFIT.com mode,
press the
iFIT.com button. The indicator beside the button
will light and the letters IF will appear in the upper
right corner of the display.
Go to your computer and start an internet
connection.
Start your Web browser, if necessary, and go
to our Web site at www.iFIT.com.
Follow the desired links on our Web site to
select a program.
Read and follow the on-line instructions for using
a program.
Follow the on-line instructions to start the
program.
When you start the program, an on-screen count-
down will begin.
Return to the elliptical crosstrainer and begin
exercising.
When the on-screen countdown ends, the pro-
gram will begin. The program will function in
almost the same way as a preset program (refer
to step 3 on page 16). However, an electronic
“chirping” sound will alert you when the resistance
and/or the pace setting is about to change.
Follow your progress with the feedback modes.
Refer to step 4 on page 14.
Measure your heart rate if desired.
Refer to step 5 on page 15.
When you are finished exercising, the console
will automatically turn off.
Refer to step 6 on page 15.
HOW TO USE THE INFORMATION MODE
The console features an information mode that shows
the total time that the elliptical crosstrainer has been
used, the total distance that the pedals have moved,
and whether the console is set to display speed and
distance in miles or kilometres.
To select the information mode, hold down the Start
Program button for three seconds. An E (for English
miles) or an M (for metric kilometres) will appear in the
display. (To change the unit of measurement, press the
+ button.) Press the Display button. The display will
then show the number of hours that the elliptical exer-
ciser has been used. Press the Display button again.
The display will show the distance that the pedals have
moved.
To exit the information mode, press the Start Program
button again.
10
9
8
7
6
5
4
3
2
1