Filter
Top Products
18
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the elliptical
crosstrainer has been used and the total number of
miles that the pedals have moved. The information
mode also allows you to switch the console from miles
to kilometers. In addition, the information mode allows
you to turn on and turn off the demo mode.
To select the information mode, press RESISTANCE
button Ò1Ó and the SELECT WORKOUT button at the
same time. The following information will be shown:
The left LED display
will show the total num-
ber of hours that the
elliptical crosstrainer
has been used.
The center LED display
will show the total num-
ber of miles that the
pedals have moved.
The right LED display
will show an ÒEÓ for
English miles or an ÒMÓ
for metric kilometers.
Press the START PRO-
GRAM button to change
the unit of measurement, if desired.
IMPORTANT: Make
sure that there is not
a ÒdÓ in the right dis-
play. If a ÒdÓ appears in
the display, the console
is in the ÒdemoÓ mode.
This mode is intended to
be used only when an elliptical crosstrainer is displayed
in a store. When the console is in the demo mode, the
power cord can be plugged in and the displays and
indicators on the console will automatically light in a
preset sequence, although the buttons on the console
will not operate. If a ÒdÓ appears in the right display
when the information mode is selected, press the
SELECT WORKOUT button so the ÒdÓ disappears.
To exit the information mode, press RESISTANCE but-
ton Ò1Ó and the SELECT WORKOUT button at the
same time.