Filter
Top Products
8
4. With the help of a second person, hold the con-
sole assembly near the Uprights (73, 74).
Remove the wire tie from the Upright Wire
H
arness (75).
Connect the Upright Wire Harness (75) to the
Console Wire Harness (71). See the inset draw-
ing. The connectors should slide together
easily and snap into place. If they do not, turn
one connector and try again. IF THE CONNEC-
TORS ARE NOT CONNECTED PROPERLY,
THE CONSOLE MAY BE DAMAGED WHEN
THE POWER IS TURNED ON.
71
Console
Assembly
4
75
74
5. Insert the brackets on the Handrails (99) into the
Uprights (73, 74).
Make sure that no wires are
pinched.
73
5
74
99
75
73
99
71
Wire
Tie