Filter
Top Products
10
8. Make sure that all parts are properly tightened before you use the treadmill. Keep the included allen
wrenches in a secure place. The allen wrench is used to adjust the walking belt (see page 31). To protect
the floor or carpet from damage, place a mat under the treadmill.
6. Note the location of the 75 ohm antenna terminal on
the treadmill. For the television to operate properly, an
a
ntenna, a CATV cable, or a VCR must be connected
to the 75 ohm antenna terminal.
If you are using an antenna,
it must be properly con-
nected and adjusted for optimal reception. See ANTENNA
CONNECTIONS on page 26 to properly connect an an-
tenna. If you are using a CATV cable, see CATV
CABLE CONNECTION on page 26 to properly connect
the cable. If you are using a VCR, see HOW TO CON-
NECT A VCR on page 27 to properly connect the VCR.
The VCR must be turned on, a videocassette must be
properly inserted, and the VCR must be playing. See
your VCR user’s manual for operating instructions.
75 Ohm Antenna Terminal
6
7. Remove the battery cover from the back of the Remote
Control (137). Insert two “AAA” batteries (not included)
into the battery compartment;
make sure that the bat-
teries are oriented as shown by the diagram inside of
the battery compartment. Reattach the battery cover.
137
“AAA” Batteries
Battery Cover
7