Filter
Top Products
2
Dear Customer.
This Manual is a basic instruction on operating
the Thermal Imaging Device TVS 7B. We assume that
an operator has a knowledge in principle on use of
electro-optical systems. However if you find any
difficulties in operating device please:
1. Read this Manual thoroughly to make sure that you
understand completely its instructions and warnings.
2. Contact our Technical Support Service via phone, fax,
e-mail.
We hope that you will enjoy our Products. Thank you.
NEWCON OPTIK
Specifications of TVS 7B
Sensor
Type*
Detector
Display(s) Resolution
Output Resolution
Thermal Sensitivity
Spectral Response
Focal Length
Field of View
Lens type
Video Output
Water Resistant
Power Supply
Battery size
Weight
Microbolometer*
“TI-3620as”, Uncooled
Amprhpous Silicon
640 x 480
640 x 480
<100 mk
7-14 um
25 mm
11 x 8 degrees
Germanium
NTSC
Yes
2.5-3.3V
Lithium/rechargeable AA
450 gr
7
Manufacturer’s Warranty
Newcon Optik warrants it’s Optical Products against genuine
manufacturer’s defects in materials and workmanship for a period of
one full year from the original date of purchase. All optical electronic parts,
components which used in covered products, such as image intensifier tubes,
focal plain arrays (thermal cores) are covered by their original Manufac-
turer’s warranty. Any device returned for warranty service or repair must be
judged by Newcon’s Technical Control Department as having been used
accordingly its original design intents. As such misuse, neglect, or any
abnormal use is not covered by this warranty. Product’s malfunction or
deterioration due to normal use is not covered by this warranty. NEWCON
will repair or replace such products or parts which, upon inspection by TCD
is found to be defective in either materials or workmanship. As a condition of
NEWCON obligation regarding a warranty work, the product must be
returned to the place where it has been purchased with satisfactory proof of
purchase (sales invoice must be presented). This warranty is null and void if
equipment has been altered, tampered with, modified, or otherwise abused,
mishandled or subjected to unauthorised repairs. NEWCON disclaims any
other warranties, either expressed or implied, except as expressed herein. The
sole obligation of NEWCON is to repair or replace the covered device. NEW-
CON expressly disclaims responsibility for any lost profits, general, specific,
direct, undirect, or consequential damages which may result from breach of
any warranty, or resulting from the use, or inability to use any NEWCON’s
product. Do not return merchandise directly to NEWCON without expressed
permission of our Customer Service Representative who has to issue a Return
Authorisation Number (RA#). NEWCON accepts No responsibility for
unauthorised returns. All items returned for exchange, upgrade, repair,
service etc. must be with all accessories, in original packaging, shipping and
insurance cost prepaid both ways. Items received by NEWCON without RA#,
missing parts or accessories, or damaged due to inadequate packaging, or
customer’s abuse (i.e. scratched, cracked body, burned IIT/FPA or broken
lens)-will be returned back to customer or repaired for the cost.
FPA Ser. No: ______________________Housing Ser. No:________________________