Filter
Top Products
16
You can raise the unit for unobstructed view without taking the
helmet off. To do so press (and hold) the button (2, Fig.6) and
rotate the unit until you hear a click.
All other operations with the unit mounted on a helmet are
identical to those with the headgear.
5.15 Mounting on a rifle
The unit can be mounted on a rifle with Picatinny mount adapter
(MIL-STD-1913). The optical axle of the goggles coincides with
the rifle’s Picatinny rail.
Two types of weapon mount adapters are available – Fig.7 and
Fig. 8. Either adapter enables mounting the unit to the Picatinny
rail. The type shown on Fig. 7 has two screws with large grooved
heads for convenient tightening.
Note: Over tightening the screws may damage the thread.
The ‘Quick Release’ model (Fig. 8) utilizes a latch with a spring
and patented accu-torque screw. You can attach and detach your
goggles within a few seconds. The accu-torque screw fixes the
mount with predefined torque thus protecting the thread from
accidental damage caused by over tightening.
FIGURE 7. NVS Unit
with Picatinn
y
ada
p
ter.