Filter
Top Products
18
The adapter (Fig. 5) consists of 2
rings:
a) Camera adapter is 52x1 mm. It
fits the filter lens thread of
various cameras, e.g. Nikon.
b) Video adapter is 37x1mm. It fits
Sony cameras and some others.
If our adapter does not fit your
camera obtain a proper step up / step
down rings.
6.12 Demist shield and sacrificial window
Note: Demist Shield and Sacrificial Window are optional.
Sacrificial window protects the objective lens from the abrasive
influence of sand and dust at night time. It should be put on the
objective lens like an objective cap with the daylight filter.
Demist shield filter protects the eyepiece against fogging. To
install it fold the eyecup to the very bottom to get the full access
to the thread, and screw the filter gently onto the eyepiece.
6.13 Using the helmet mount
The Unit can be equipped with an optional helmet mount.
This mount can be customized to fit a wide range of
existing helmet models.
The mount is attached to a helmet with stripes.
FIGURE 5
Camera / Video ada
p
te
r